Welcome to Shanghai Chengwei Instrument Technology Co., Ltd website!

Product Center

hot news

Contact us

Shanghai Chengwei Instrument Technology Co., Ltd

Contact person: manager Liu

Contact: 13310112765

Address: Shanghai

Fabric thickness gauge

Fabric thickness gauge
Traffic volume : 5
Editing time : 2020-01-15
Detailed introduction:

  厚度仪

产品介绍  
本测厚仪是用于测量硫化橡胶或热塑性橡胶试验用试样和制品等厚度的测量仪器,本仪器具有结构简单、使用方便、测量快速、直感等特点,其执行GB/T5723-93标准。

  测试原理将试样放置在基准版上,用压脚对试样施加压力,测量接触试样的压脚面积与基准板之间的距离,即为厚度值。

  仪器配件

  压脚

  2000mm2面积压脚

  其他定制面积压脚

  砝码

  1kpa砝码

  0.7kpa砝码

  0.3kpa砝码(选配)

 

标准如下:

QB/T2709-2005

ISO 2589

ASTM D1813

GB/T 3820-1997

ISO 5084-1996

JIS L1096-1999

BS 3144clause3

 

  数显表功能键如图。

 

 

数显指示表

  图 2 厚度测试位置(图中红色为不合适取样)

  压脚的更换

  根据标准和特殊需求,可能有不同压脚需要根据需要选择不同压脚。

  在关机状态下将压脚旋下,将替换的压脚旋上,即可开机进行正常测试。

  试验步骤

  数显指示表使用前注意事项

  测量杆上若有灰尘等污垢,将影响测杆的移动,因此使用前请使用不含油的干净抹布擦

  拭干净,请勿在测杆上涂油。

  请用软干布将表壳擦拭干净,若表壳上有严重的污垢,请用含有中性清洁剂潮湿的抹布

  擦拭,勿甩易挥发溶剂如稀释剂,以免损伤外壳。

  未经授权的人员请勿自行 拆装维修数显指示表,以免损坏指示表。

  试验步骤

  短按数显表上ZERO/ON键开启数显表。

  确保仪器水平摆放后,按ZERO/ON清零数显表。

  抬起压脚,将织物放置在压脚下,放下压脚,将砝码放在压脚上。

  启动秒表,5±1s内读取读数。

  每张皮革测量点的个数根据不同的标准选择。

Founded in 1969 (Germany: Germany eager Technology Inc.) is an internationally renowned industrial company producing raw material testing and measuring instruments. Its production of wear tester, flame retardant, combustion tester, scratch tester, fatigue tester, textile color fastness, scratch, air permeability, abrasion, combustion, perspiration, physical properties, Water repellency, water resistance, leather and other test standards, including test instruments, experimental consumables, professional test standards, test methods manual and other test instruments are the most widely used instruments for durability test of products in the world. The name of German eager company is still the perfect combination of quality and reliability. Each product is marked with relevant international application standards, which can ensure that the products, pre-sales and after-sales services provided for you are the most efficient and high-quality, Chengwei Instrument Technology (Germany) Co., Ltd. is a German eager agent and branch company, which has established long-term strategic cooperation with many well-known instrument and equipment manufacturers in Europe and America. Mainly for domestic scientific research institutions, enterprises, quality inspection institutions to provide high cost-effective, high-quality testing equipment, To provide equipment and overall solutions for testing related laboratories, Chengwei Instrument Technology (Germany) Co., Ltd. in order to ensure the quality and reliability of products and pass strict tests before each product leaves the factory, our material testing industry standards are widely recognized by the industry. Chengwei Instrument Technology (Germany) Co., Ltd. is located in the international city of the east coast. It is a high-tech enterprise integrating scientific research, production and sales. It conforms to relevant international standards such as IEC, CCC, UL, CSA, VDE, JIS, KS, sev. BSI, HD, Kema, SSA and so on. Our development in recent years stems from our customers' trust in eager company. For a long time, the company has won unanimous praise from peers with its high-quality products and perfect services. At present, the customers include laboratories of quality supervision bureaus and inspection and quarantine bureaus of all provinces in China, and quality inspection departments of large and medium-sized enterprises. Our tenet: sincere service, sincere cooperation, common development and future creation.

Pay attention
Shanghai Chengwei Instrument Technology Co., Ltd
Contact us

Shanghai Chengwei Instrument Technology Co., Ltd

Contact person: manager Liu

Contact: 13310112765

Address: Shanghai

Copyright ©Shanghai Chengwei Instrument Technology Co., Ltd All rights reserved.

13310112765